1. One USB Type-C Plug Connector
2. One USB Type-C Receptacle Connector for +5V Power
3. Eight SMA Connectors
4. One SPDT Swicth to Select Rp Pull-Up or Rd Pull Down
5. One SP3T Switch to Select CC1/CC2/Floating.
6. Dimension : 58.0 mm x 45.85 mm
USB-C 3.1 Tx/Rx Signals Integrity Test
*AUT20098 is a substitute for Full Type-C Breakout in USB31CET Kits. In order to perform the integrity test, you must have the rest of UAB31CET Kits test fixtures which can be purchased from the USB-IF.
1. Good Signal Quality compare with original Design.
2. Slide switch for CC1/CC2 & Rp/Rd Setting,
3. Type-C Connector for Delivery +5V Power instead of DC Jack.
4. SMD Type SMA which’s easy to fix if there are damaged in the future.