1. USB-A Host Measurement (Model name: AUT20135)
*AUT20135 is a substitute for USB 3.1 Host Fixture 1A in USB31AET Kits. In order to perform the integrity test, you must have the rest of UAB31AET Kits test fixtures which can be purchased from the USB-IF.
- One USB 3.0 Type-A Plug Connector
- One USB 3.0 Type-A Receptacle Connector
- Two SMA Connectors
- 1×4 Pin Header for Vbus Measurement if needed.
- LED Indicator to make sure Power
- Dimension : 40.20 mm x 30.48 mm
2. USB-A Host Short Channel (Model name: AUT22108)
- One USB 5Gbps Standard A plug
- Two SMA connectors for Standard A plug Tx
- Two SMA connectors for Standard A plug Rx
3. USB-B Host Loss/Calibration (Model name: AUT22032)
- One USB 5Gbps Standard B receptacle
- Two SMA connectors for Host Loss section
- Two SMA connectors for Device Calibration section
4. USB-A Device Measurement (Model name: AUT21003)
- One USB 5Gbps Standard A receptacle
- One USB 5Gbps Standard B receptacle
- Two SMA connectors for Standard A receptacle Tx
- One USB-C® receptacle for power charging
5. USB-A Device Short Channel (Model name: AUT22109)
- One USB 5Gbps Standard A receptacle
- Two SMA connectors for Standard A receptacle Tx
- Two SMA connectors for Standard A receptacle Rx
- One USB-C® receptacle for power charging
6. USB-A Device Loss (Model name: AUT22033)
- Two USB 5Gbps stacked Standard A receptacles
- Two SMA connectors for the upper Standard A receptacle Tx
This test fixture set includes following items:
1. USB-A Host Measurement (Model name: AUT20135) x1
2. USB-A Host Short Channel (Model name: AUT22108) x1
3. USB-B Host Loss/Calibration (Model name: AUT22032) x1
4. USB-A Device Measurement (Model name: AUT21003) x1
5. USB-A Device Short Channel (Model name: AUT22109) x1
6. USB-A Device Loss (Model name: AUT22033) x1
7. USB 5Gbps Std. A to Std. B 3m cable x1
8. USB 5Gbps Std. A to Std. B 1m cable x1
9. USB 5Gbps Std. A to Std. B 15~20cm cable x2
10. USB 5Gbps Std. A to Micro B 15~20cm cable x1
1. USB-A Host Measurement (Model name: AUT20135)
- Signals Improvement
- SMD SMA Connector implement
- Vbus LED Indicated
2. USB-A Host Short Channel (Model name: AUT22108)
- Use for USB 5Gbps legacy DFP Tx test and Rx short channel test
- SMA connectors easy to be replaced if broken
3. USB-B Host Loss/Calibration (Model name: AUT22032)
- Host Loss section: Use for USB 5Gbps legacy DFP Rx calibration and Rx long channel test
- Device Calibration section: Use for USB 5Gbps legacy UFP Rx calibration
- SMA connectors easy to be replaced if broken
4. USB-A Device Measurement (Model name: AUT21003)
- Use for USB 5Gbps legacy UFP Tx test, Rx calibration and Rx long channel test
- SMA connectors easy to be replaced if groken
- Supply power from USB-C® to DUT (Device Under Test)
5. USB-A Device Short Channel (Model name: AUT22109)
- Use for USB 5Gbps legacy UFP Tx test and Rx short channel test
- SMA connectors easy to be replaced if broken
- Supply power from USB-C® to DUT (Device Under Test)
6. USB-A Device Loss (Model name: AUT22033)
- Use for USB 5Gbps legacy UFP Rx calibration and Rx long channel test
- SMA connectors easy to be replaced if broken
